bogga_banner

Tube Mill Line

Tube Mill Line

  • High Precision Tube Mill khadka wax soo saarka

    High Precision Tube Mill khadka wax soo saarka

    HORMARINTA SHAYADA IYO SHURUUDAHA
    Ujeedada:Qalabka waxaa inta badan loo isticmaalaa in lagu nadiifiyo oogada dibadda ee birta aan la nadiifin
    Shuruudaha kala duwan ee workpiece:
    1. Workpiece dhexroor kala duwan: 19-76mm

    2.Wararka dhererka shaqada: 6000mm
    3.Ugu danbeynta dusha sare:Ra 0.1
    Shuruudaha dhameystirka 4.Final: Shiidida iyo polishing
    QALABKA QALABKA UGU WEYN DHISMAHA IYO HANTIDA
    Qalabku wuxuu inta badan ka kooban yahay hal qaybood oo madaxa wax lagu shiidi karo, nidaam planetaryrotation, set kontorool koronto, qaab quudin, qayb shaqo
    habka qaadashada (sii daynta), nidaamka ka saarista boodhka (ikhtiyaar ah).
    1.Madaxa shiidaya:
    Mashiinku wuxuu ku qalabaysan yahay mid ka mid ah madaxyo shiidi oo loo isticmaali karo in lagu nadiifiyo dusha sare ee qalabka shaqada . Sida laga soo xigtay shiidadu
    sifooyinka shaqada, u isticmaal suumanka xoqan sida walxaha wax lagu shiido.Madaxa shiidi wuxuu ka kooban yahay hal matoor madaxa dhalaalaysa, habka taageerada, habka wadista awoodda, iyo saxan kor u qaada.
    2.Nidaamka wareega meeraha:
    Shaqada ugu weyn ee habkani waa in la bixiyo dhaqdhaqaaqa wareega ee loo baahan yahay ee madaxa shiidi inta lagu jiro suufka.Awood matoorku waa
    waxaa lagu kala qaadaa suunka V-suunka si uu toos ugu kaxeeyo miiska si uu u wareego.Waxay ka kooban tahay matoor, la leexsan karo iyo qalab gudbin.
    3. Xakamaynta korantada:
    Doorka nidaamku waa soo gelinta tilmaamaha, xakamaynta dhaqdhaqaaqa mishiinka si loo gaadho kantaroolka, inta badan konsole iyo elegtarooniga
    golaha xakamaynta, inverter iyo qaybaha kala duwan ee korantada hoose.
    4.Nidaamka quudinta:
    Nidaamka quudinta waxaa loo isticmaalaa quudinta tooska ah ee nadiifinta tuubada tooska ah.Waxay ka kooban tahay rullaluistemadka, feederiyaha, furka hagaajinta dhabarka iyo matoorada
    nidaamka.
    5. Farsamaynta helitaanka (sii daynta) qaybta shaqada:
    Tani waxaa loogu talagalay kaalmaynta qalabka shaqada inta lagu jiro suufka tuubada tooska ah.Waxay ka kooban tahay hagaajinta birta, taayirrada caagga ah iyo sariiraha.
    6.Nidaamka boodhka ka saarida (ikhtiyaar):
    Doorka nidaamkani waa in la ururiyo boodhka ka soo baxa inta lagu jiro habka wax lagu shiido, si loo xalliyo ururinta boodhka, dayactirka fudud
    iyo nadiifinta.Waxay inta badan ka kooban tahay ururiyaha boodhka duufaanka, nadiifiyaha boorsada, iyo tuubooyinka qashinka ururinta.

    ?QALABKA FARSAMADA
    Halbeegyada waxqabadka farsamada ugu muhiimsan ee mashiinka:

    No Mashruuca Tilmaamayaasha la gaari karo
    1 Dhexroor si wax ku ool ah loo safeeyey (mm) 19-76mm
    2 Dhererka si wax ku ool ah loo safeeyey (mm) 6000
    3 Qalafsanaanta dusha u dambaysa Ra 0.1
    4 Daaweynta sii deynta boodhka Buuxi heerarka qaranka (ikhtiyaar)

    ?Shuruudaha deegaanka shaqada:

  • 76mm Tube Mill Line Pipe Mill Line

    76mm Tube Mill Line Pipe Mill Line

    alxanka soo noqnoqda sare waxaa loo isticmaalaa in wax soo saarka ee tuubooyinka alxanka.Alxanka soo noqnoqda ee sarreeya wuxuu leeyahay koronto weyn, xawaaraha alxanka sarena waxaa lagu gaari karaa tuubooyinka birta oo leh walxo kala duwan, caliber iyo dhumucdiisuna tahay gidaarka.

  • Tuubbada iyo Mills Tubooyinka Khadka Wax-soo-saarka Alxanka ee Joogtada Sare

    Tuubbada iyo Mills Tubooyinka Khadka Wax-soo-saarka Alxanka ee Joogtada Sare

    line-shiidka tuubada inta badan ka kooban yahay hal set oo ah madaxa shiidi, set oo ah nidaamka planetaryrotation, set oo ah kantaroolka korantada, set oo ah nidaamka quudinta, set of workpiece helaya (siidayn) farsamada, set oo ah nidaamka saarista boodhka (ikhtiyaar) .

  • Tool toosan Birta alxanka birta Tube Mill Line

    Tool toosan Birta alxanka birta Tube Mill Line

    Xariiqda wax-shiidka ee tuubada waa tol toosan oo ku saabsan qalabka alxanka ee tuubooyinka birta ee ka samaysan bir-kulul-duuban ama qabow-duuban ama gariiradaha.